Castable Resin

3D printing material Somos® Element is a new antimony-free stereolithography material that has been specifically created to improve the repeatability and quality of 3D printed casting patterns.
Patterns created with Somos® Element have strong green strength, are dimensionally stable during storage and leave a minimal amount of ash residue after burnout. Any residue that is left behind is easily removed, leaving a perfectly clean void in the ceramic mold. This translates into less mold prep and lower rates of rework saving customers time and money.

KEY BENEFITS

Very clean burnout with low residual ash
Low viscosity
Dimensionally stable

TECHNICAL SPECIFICATIONS

APPEARANCE	Clear
PRINTING PROCESS	Stereolithography (SLA)
MAXIMUM PART DIMENSIONS	1400 x 700 x 500 mm (551.1 x 275.5 x 196.8 in)
LAYER THICKNESS	0.1 -0.25 mm
STANDARD ACCURACY	L<100 mm: ±0.2mm L≥100 mm: ±0.2% x L
MINIMUM WALL THICKNESS	0.6 mm
MINIMUM PORE DIAMETER	1.0 mm
TENSILE STRENGTH	53MPa
TENSILE MODULUS	3170MPa
FLEXURAL STRENGTH	114MPa
FLEXURAL MODULUS	3230 MPa
IMPACT STRENGTH	22 J/M
HEAT DEFLECTION TEMPERATURE (0.46 MPA)	58 °C